You are here: Foswiki>Informatik/Helpdesk Web>Followmeeinrichten (14 Jun 2019, NizarKadriGa92gam)Edit Attach

FollowMe setup

The current article explains how to set up FollowMe via detailed instructions for operating systems MacOS, Windows and Linux.


Setup on MacOS

1. Access Xerox' website and download the required driver. In this example: built-in controller (always selected), macOS 10.13 - High Sierra, English.

1.png

2. Run the downloaded driver and install it. Click twice on "Continue" upon being presented with the "Print Queue Not Created" window.

mac2.png


3. The "Printers & Scanners" settings should then be opened (Apple menu => System preferences => Printers & Scanners). Here you can add a new printer by clicking on the "+" symbol.

2.png


4. In the "IP" tab following settings should be applied:
  • Address: print.in.tum.de
  • Protocol: Internet Printing Protocol - IPP
  • Queue: printers/followme
  • Name: arbitrary
  • Location: arbitrary
  • Use: choose "Xerox WorkCentre 7835" and confirm with "OK"

3.png4.png


5. Select the configured printer (in this example "Followme print") and choose "Options & Supplies".

5.png


6. Apply following settings in the "Options" tab:
  • Paper Trays: 5 Trays (High Capacity Tandem Trays)
  • Finisher: Professional Finisher
  • Hole Punch Module: 2 and 4 Hole Punch Unit
  • LAN Fax Module: Not Installed
  • Job Storage Module: Installed
  • LAN Fax Email Confirmation: Not Installed

6.png


7.Finally, open ucentral and activate the printer in the "Xerox-Printing" tab. You'll then be able to use FollowMe.

Remark: If you are connected via WLAN, the page should remain open while printing. Additionally, you'll have to activate the printer next time again.

mac7-1.png

Setup on Windows

1. The RBG provides a modified driver for FollowMe configuration on Windows. Its usage is at your own risk. Download link

2. Launch the downloaded installation program. (Xerox-WC78XX-TUM-Driver-1.4.exe)

3. Pick "followme" and, if you'd like to use direct printing, a printer in your proximity.

win1.png


4. Acknowledge the subsequent message by clicking on "Install this driver software anyway".

win2.png


5. Select "Yes" in the setup pop-up.

win3.png


6. A browser window of ucentral is then opened. Please log in with your RBG account and corresponding password.

win4.png


7. Click "Xerox-Printing" on the left side and then "Diesen Drucker zum Drucken freischalten"

Remark: If you are connected via WLAN, the page should remain open while printing. Additionally, you'll have to activate the printer next time again.

win5-1.png

Setup on Linux

First, you should download the x2UNIV.ppd driver file (right click on the link => "Save as". In order to install it, you need root privileges, e.g. using the "sudo" command. After that you can locally configure the printer under the name "followme" using the following commands:
  1. sudo lpadmin -E -p followme -v ipps://print.in.tum.de/printers/followme -P x2UNIV.ppd -D "Xerox-!Followme" -L "TUM"
  2. sudo cupsenable followme
  3. sudo cupsaccept followme
  4. Log in to ucentral and activate your printer under "Xerox-Printing"

The answers to the following questions can be found in our knowledge base, which can be reached only through the MWN (Uni) network. In order to open the website, you can establish a connection to the network via AnyConnect.

  1. Card reader flashes red while reading legic card
  2. FollowMe: Ucentral shows 'retreiving status'
  3. Ucentral: You can't print from this computer
  4. How can employees print on the Xerox printers in the fmi building via WLAN?
  5. FollowMe for two cards
  6. FollowMe: Hold for Authentication
  7. Guest-copy cards for guest
  8. How to register a legic-card in Xerox printer?
  9. Printing through web in ucentral: Servie not (yet) available
  10. Printing through ucentral: I can only see Rechnerhalle printers
  11. Wrong format when printing via ucentral
  12. When printing via Ucentral is the error print.in.tum.de could not be called?

Topic attachments
I Attachment Action Size Date Who Comment
1.pngpng 1.png manage 34 K 14 Dec 2018 - 12:24 NikolayStoyanovGa48pif  
2.pngpng 2.png manage 74 K 14 Dec 2018 - 12:36 NikolayStoyanovGa48pif  
3.pngpng 3.png manage 46 K 14 Dec 2018 - 13:17 NikolayStoyanovGa48pif  
4.pngpng 4.png manage 61 K 14 Dec 2018 - 13:22 NikolayStoyanovGa48pif  
5.pngpng 5.png manage 73 K 14 Dec 2018 - 13:27 NikolayStoyanovGa48pif  
6.pngpng 6.png manage 513 K 14 Dec 2018 - 13:34 NikolayStoyanovGa48pif  
IMG_4114.JPGJPG IMG_4114.JPG manage 3 MB 19 Oct 2018 - 14:26 AyseguelOmusNe63guq  
mac1.pngpng mac1.png manage 182 K 19 Oct 2018 - 14:26 TobiasZappeGa34gey  
mac2.pngpng mac2.png manage 797 K 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
mac3.pngpng mac3.png manage 179 K 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
mac4.pngpng mac4.png manage 684 K 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
mac5.pngpng mac5.png manage 305 K 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
mac6.pngpng mac6.png manage 1 MB 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
mac7-1.pngpng mac7-1.png manage 88 K 19 Oct 2018 - 15:08 TobiasZappeGa34gey  
mac7.pngpng mac7.png manage 88 K 19 Oct 2018 - 15:07 TobiasZappeGa34gey  
win1.pngpng win1.png manage 245 K 19 Oct 2018 - 14:27 TobiasZappeGa34gey  
win2.pngpng win2.png manage 205 K 19 Oct 2018 - 14:28 TobiasZappeGa34gey  
win3.pngpng win3.png manage 79 K 19 Oct 2018 - 14:28 TobiasZappeGa34gey  
win4.pngpng win4.png manage 76 K 19 Oct 2018 - 14:28 TobiasZappeGa34gey  
win5-1.pngpng win5-1.png manage 88 K 19 Oct 2018 - 15:34 TobiasZappeGa34gey  
win5.pngpng win5.png manage 170 K 19 Oct 2018 - 14:28 TobiasZappeGa34gey  
x2UNIV.ppdppd x2UNIV.ppd manage 168 K 19 Oct 2018 - 15:39 TobiasZappeGa34gey  
Xerox-WC78XX-TUM-Driver-1.4.exeexe Xerox-WC78XX-TUM-Driver-1.4.exe manage 14 MB 24 Oct 2018 - 08:27 StefanZiarasGa49taq  
Topic revision: r14 - 14 Jun 2019, NizarKadriGa92gam
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback